Installation and Upgrade Checklist Report for IF 8.0.2 Windows Server 2022 x86-64

To use SORT, JavaScript must be enabled. How to enable JavaScript.

Enter your product and environment information to create an Installation and Upgrade checklist.
Product:
Product version you are installing or upgrading to:
Cloud Platform:
Platform:
Processor:
Product version you are upgrading from (optional):

Custom Reports Using Data Collectors

Installation and Upgrade Checklist Report for InfoScale Foundation 8.0.2, Windows Server 2022, x86-64

Provide your feedback about this report to help us imporove it.

Rating this report:
Enter your email address:
What sections in this report are useful? or what sections in this report are not useful?

What improvements do you want to include in this report?

Type the numbers in the picture:

View Control
Use "Collapse all" to hide all sections, or "Expand all" to show all sections.	Collapse all

Index

Components for InfoScale

System requirements

Product documentation

Patches for InfoScale Foundation and Platform

End of Support Life information

Platform configuration

Host bus adapter (HBA) parameters and switch parameters

Operations Manager

Array parameters

Components for InfoScale

The InfoScale product you selected contains the following component(s).

Dynamic Multi-Pathing
Storage Foundation Basic

Get more introduction of Veritas InfoScale.

System requirements

Required number of CPUs: 1

Recommended speed of CPUs: 1GHz AMD Opteron, AMD Athlon 64, Intel Xeon with Intel EM64T support, Intel Pentium IV with EM64T support processor or faster.

Required memory: 1GB of RAM

Required disk space:

Installation options	Required disk space
InfoScale Foundation	1200 MB

Product documentation

Product guides
	Dynamic Multi-Pathing 8.0.2 Administrator's Guide - Windows - English
	Storage Foundation 8.0.2 Quick Recovery Solutions Guide for Microsoft SQL Server - Windows - English
	Storage Foundation 8.0.2 Quick Recovery Solutions Guide for Enterprise Vault - Windows - English
	Veritas InfoScale™ 8.0.2 Getting Started Guide - Windows - English
	Storage Foundation 8.0.2 Administrator's Guide - Windows - English
Release Notes	Veritas InfoScale™ 8.0.2 Release Notes - Windows - English
Supplemental Content
	Veritas InfoScale Licensing Guide - English
Installation and Configuration
	Veritas InfoScale™ 8.0.2 Installation and Upgrade Guide - Windows - English
Compatibility lists
	Veritas InfoScale Hardware Compatibility List - English
	Veritas InfoScale™ Support Matrix for Oracle® - English
	Veritas InfoScale Software Compatibility List - English

Patches for InfoScale Foundation and Platform

Product (recommended)

No patches found.

Platform (required)

No patches required.

End of Support Life information

Last updated on 2024-04-19. Refer to EOSL page for more information about support.

Release Date(GA)	Extended Support Starts	Sustaining Support Starts	End of Support Life Date(EOSL)
2023-06-05	To Be Determined	To Be Determined	-

Platform configuration

Tested and supported editions:

Edition	Version
Windows Server 2022 Standard, Datacenter	Latest Update

Host bus adapter (HBA) parameters and switch parameters

Unless otherwise stated in the hardware compatibility list (HCL), the specified Veritas product supports all fibre channel and iSCSI HBAs and fibre channel switches supported by the platform and storage array manufacturers.

Operations Manager

Veritas InfoScale Operations Manager gives you a single, centralized management console for the InfoScale products. You can use it to monitor, visualize, and manage storage and cluster resources, and generate reports about these components in the Management Server domain.It can also help administrators centrally manage diverse data center environments. This section lists the documents for Veritas InfoScale Operations Manager 8.0.2.

Documentation

Array parameters

Dell EMC

Array	Mode	Interface	Note
Celerra series	A/A-A	Fibre Channel
Celerra series	A/P-C	Fibre Channel
CLARiiON AX series	A/A-A	Fibre Channel	* Supports CLARiiON AX4 only.
CLARiiON AX series	A/A-A	iSCSI	* Supports CLARiiON AX4 only.
CLARiiON AX series with PowerPath	A/A-A	Fibre Channel	* Supports CLARiiON AX4 only.
CLARiiON AX series with PowerPath	A/A-A	iSCSI	* Supports CLARiiON AX4 only.
CLARiiON AX series	A/P-C	Fibre Channel	* Supports CLARiiON AX4 only.
CLARiiON AX series	A/P-C	iSCSI	* Supports CLARiiON AX4 only.
CLARiiON AX series with PowerPath	A/P-C	Fibre Channel	* Supports CLARiiON AX4 only.
CLARiiON AX series with PowerPath	A/P-C	iSCSI	* Supports CLARiiON AX4 only.
CLARiiON CX4 series	A/A-A	Fibre Channel
CLARiiON CX4 series	A/A-A	iSCSI
CLARiiON CX4 series with PowerPath	A/A-A	iSCSI
CLARiiON CX4 series	A/P-C	Fibre Channel
CLARiiON CX4 series	A/P-C	iSCSI
CLARiiON CX4 series with PowerPath	A/P-C	Fibre Channel
CLARiiON CX4 series with PowerPath	A/P-C	iSCSI
EqualLogic PS5000 series	A/A	iSCSI	* There is a known problem of IO hang sometimes when a NIC port is disabled on the Switch. Also, it is recommended to use 2 NICs for private heartbeat and a separate NIC for public-mix use or client-only use in MSCS environments due to a known issue when Private NICs are used for private heartbeat and other types of traffic.
EqualLogic PS6000 series	A/A	iSCSI
PowerMax series	A/A	Fibre Channel	* PowerMax with PowerPath is supported * PowerMax with SRDF Metro configuration is supported.
PowerVault MD32xx Series	A/P-C	iSCSI
PowerVault MD32xx Series	A/P-C	SAS
PowerVault MD36xx Series	A/P-C	Fibre Channel
PowerVault MD36xx Series	A/P-C	iSCSI
PowerVault MD38xx Series	A/P-C	Fibre Channel	* Support for this array model is available from InfoScale release 7.2 and later.
SC Series	A/A	Fibre Channel	* Supports Storage Center OS (SCOS) software version 6.2.2 and higher.
SC Series	A/A	iSCSI	* Supports Storage Center OS (SCOS) software version 6.2.2 and higher.
ScaleIO	A/A	Ethernet
Symmetrix DMX series	A/A	Fibre Channel	* Requires firmware version 5670.73 or higher to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * Supports Symmetrix DMX-3 and Symmetrix DMX-4 only.
Symmetrix DMX series with PowerPath	A/A	Fibre Channel	* Supports Symmetrix DMX-3 and Symmetrix DMX-4 only.
Symmetrix VMAX series	A/A	FCoE	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
Symmetrix VMAX series	A/A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
Symmetrix VMAX series	A/A	iSCSI	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
Symmetrix VMAX series with PowerPath	A/A	Fibre Channel
Unity series	A/A-A	Fibre Channel
Unity series with PowerPath	A/A-A	Fibre Channel
Unity XT series	A/A-A	Fibre Channel
Unity XT series	A/A-A	iSCSI
VMAX3/VMAX All Flash Family series	A/A	Fibre Channel	* VMAX all flash with SRDF/Metro configuration is supported.
VMAX3/VMAX All Flash Family series with PowerPath	A/A	Fibre Channel
VNX series	A/A-A	Fibre Channel	* Supported with block mode storage only.
VNX series	A/A-A	iSCSI	* Supported with block mode storage only.
VNX series with PowerPath	A/A-A	Fibre Channel
VNX series	A/P-C	Fibre Channel	* Supported with block mode storage only.
VNX series	A/P-C	iSCSI	* Supported with block mode storage only.
VNX series with PowerPath	A/P-C	Fibre Channel
VNX2 series	A/A-A	Fibre Channel	* Supported with block mode storage only.
VNX2 series with PowerPath	A/A-A	Fibre Channel
VPLEX	A/A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
VPLEX with PowerPath	A/A	Fibre Channel
XtremIO	A/A	FCoE
XtremIO	A/A	Fibre Channel
XtremIO	A/A	iSCSI

Fujitsu

Array	Mode	Interface	Note
ETERNUS DX400/DX500/DX600 series	A/A	Fibre Channel	* Ensure proper array settings are configured to support this mode. * Fujitsu Storage Cluster is not supported. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details.
ETERNUS DX400/DX500/DX600 series	A/A-A	Fibre Channel	* Ensure proper array settings are configured to support this mode. * Fujitsu Storage Cluster is not supported. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details.
ETERNUS DX60/DX80/DX90/DX100/DX200 series	A/A	Fibre Channel	* Ensure proper array settings are configured to support this mode. * Fujitsu Storage Cluster is not supported. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details. * Thin Reclamation is not supported with ETERNUS DX60/DX60 S2/DX80/DX90.
ETERNUS DX60/DX80/DX90/DX100/DX200 series	A/A-A	Fibre Channel	* Ensure proper array settings are configured to support this mode. * Fujitsu Storage Cluster is not supported. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details. * Thin Reclamation is not supported with ETERNUS DX60/DX60 S2/DX80/DX90.
ETERNUS DX8000 S3/S4 series	A/A	Fibre Channel	* Ensure proper array settings are configured to support this mode. * Fujitsu Storage Cluster is not supported. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details.
ETERNUS DX8000 S3/S4 series	A/A-A	Fibre Channel	* Ensure proper array settings are configured to support this mode. * Fujitsu Storage Cluster is not supported. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details.
ETERNUS DX8000 series	A/A	Fibre Channel	* Ensure proper array settings are configured to support this mode. * Fujitsu Storage Cluster is not supported. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details.
ETERNUS DX8000 series	A/A-A	Fibre Channel	* Ensure proper array settings are configured to support this mode. * Fujitsu Storage Cluster is not supported. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details.
ETERNUS VS850	A/A-A	Fibre Channel
ETERNUS VS850 with Subsystem Device Driver	A/A-A	Fibre Channel
ETERNUS2000 series	A/A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
ETERNUS4000 series	A/A	Fibre Channel	* Excludes ETERNUS4000 models 80 and 100. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details.
ETERNUS8000 series	A/A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * There are known issues with Reclamation, see http://www.veritas.com/docs/TECH164853 for more details.

Hewlett Packard Enterprise

Array	Mode	Interface	Note
3PAR F/T-Class, StoreServ 7000/8000/9000/10000/20000 Storage	A/A	Fibre Channel	* 3PAR F/T-Class maximum firmware version is 3.1.3; 3PAR StoreServ 7000/10000 minimum firmware version 3.1.2 and StoreServ 8000/20000 minimum firmware version 3.2.2 are required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array. * StoreServ 8000/20000 minimum firmware version 3.2.2 MU1 is required for Thin Reclamation support.
Alletra 5000 Series	A/A-A	Fibre Channel
Alletra 6000 Series	A/A-A	Fibre Channel
Alletra 9000 Storage	A/A	Fibre Channel
MSA 1040 SAN	A/A-A	Fibre Channel
MSA 1060 Storage	A/A-A	Fibre Channel
MSA 2040 SAN	A/A-A	Fibre Channel
MSA 2040 SAN	A/A-A	iSCSI
MSA 2040 SAN	A/A-A	SAS
MSA 2050 Storage	A/A	Fibre Channel
MSA 2060 Storage	A/A-A	Fibre Channel
MSA P2000	A/A-A	Fibre Channel
MSA1000	A/A	Fibre Channel
MSA1500	A/A	Fibre Channel	* Active/Active array firmware is required. Contact your local HP representative for more information. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
MSA2000fc series	A/A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
MSA2012i	A/A	iSCSI	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
MSA2012sa	A/A	SAS	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
MSA2212i	A/A	iSCSI
MSA2212sa	A/A	SAS
P9500	A/A	Fibre Channel	* Requires firmware version 70-01-04-00/00 or higher to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
Primera 600 Storage	A/A	Fibre Channel
XP7 series	A/A	Fibre Channel
XP8 series	A/A	Fibre Channel
XP8 series	A/A-A	Fibre Channel

Hitachi Vantara

Array	Mode	Interface	Note
HUS 100 series	A/A	Fibre Channel	* For EOSL Storage Systems, Please refer Hitachi Vantara Product Life-Cycle Matrix - https://knowledge.hitachivantara.com/Support_Information/More_Info/Product_Life-Cycle_Matrix
HUS 100 series with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
HUS VM	A/A	Fibre Channel	* For EOSL Storage Systems, Please refer Hitachi Vantara Product Life-Cycle Matrix - https://knowledge.hitachivantara.com/Support_Information/More_Info/Product_Life-Cycle_Matrix
HUS VM with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
SMS/AMS2000 series	A/A	Fibre Channel	* Excludes SMS100. * For EOSL Storage Systems, Please refer Hitachi Vantara Product Life-Cycle Matrix - https://knowledge.hitachivantara.com/Support_Information/More_Info/Product_Life-Cycle_Matrix * SMS does not support Thin Provisioning.
SMS/AMS2000 series	A/A	iSCSI	* Excludes SMS100. * For EOSL Storage Systems, Please refer Hitachi Vantara Product Life-Cycle Matrix - https://knowledge.hitachivantara.com/Support_Information/More_Info/Product_Life-Cycle_Matrix * SMS does not support Thin Provisioning.
SMS/AMS2000 series with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel	* Excludes SMS100.
SMS/AMS2000 series with HDLM (Hitachi Dynamic Link Manager)	A/A	iSCSI	* Excludes SMS100.
USPV/USPVM	A/A	Fibre Channel	* For EOSL Storage Systems, Please refer Hitachi Vantara Product Life-Cycle Matrix - https://knowledge.hitachivantara.com/Support_Information/More_Info/Product_Life-Cycle_Matrix
USPV/USPVM with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
VSP	A/A	Fibre Channel	* For EOSL Storage Systems, Please refer Hitachi Vantara Product Life-Cycle Matrix - https://knowledge.hitachivantara.com/Support_Information/More_Info/Product_Life-Cycle_Matrix * Requires firmware version 70-01-04-00/00 or higher to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
VSP with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
VSP 5000 series	A/A	Fibre Channel
VSP E series	A/A	Fibre Channel
VSP G series	A/A	Fibre Channel	* For EOSL Storage Systems, Please refer Hitachi Vantara Product Life-Cycle Matrix - https://knowledge.hitachivantara.com/Support_Information/More_Info/Product_Life-Cycle_Matrix
VSP G series with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
VSP Gx00/Fx00 series	A/A	Fibre Channel	* For EOSL Storage Systems, Please refer Hitachi Vantara Product Life-Cycle Matrix - https://knowledge.hitachivantara.com/Support_Information/More_Info/Product_Life-Cycle_Matrix

Huawei

Array	Mode	Interface	Note
18000 series	A/A	Fibre Channel	* For Huawei 18000 A/A, MS KB http://support.microsoft.com/kb/2522766 is required. Check "Prerequisites" of the KB to install MS KB.
OceanStor Series	A/A-A	Fibre Channel	* For OceanStor V3 models, MS KB http://support.microsoft.com/kb/2522766 is required. Check "Prerequisites" of the KB to install MS KB. * Thin Reclamation is only supported with OceanStor Series with volumes track aligned to 2048 sectors, the ALUA explicit trespass on Thin LUN is not supported.
OceanStor Series	A/A-A	iSCSI	* For OceanStor V3 models, MS KB http://support.microsoft.com/kb/2522766 is required. Check "Prerequisites" of the KB to install MS KB. * Thin Reclamation is only supported with OceanStor Series with volumes track aligned to 2048 sectors, the ALUA explicit trespass on Thin LUN is not supported.
S5000 series	A/P-C	Fibre Channel
VIS series	A/A	Fibre Channel

IBM

Array	Mode	Interface	Note
DS3950	A/P-C	Fibre Channel	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
DS3950 with DS Storage Manager	A/P-C	Fibre Channel
DS5020	A/P-C	Fibre Channel	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
DS5020 with DS Storage Manager	A/P-C	Fibre Channel
FlashSystem series	A/A	Fibre Channel	* Supports FlashSystem 840/900 models only.
Spectrum Virtualize series	A/A-A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
Spectrum Virtualize series	A/A-A	iSCSI	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
Spectrum Virtualize series with Subsystem Device Driver	A/A-A	Fibre Channel
Storwize series	A/A-A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
Storwize series	A/A-A	iSCSI	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
Storwize series with Subsystem Device Driver	A/A-A	Fibre Channel
System Storage DS3000 series	A/P-C	Fibre Channel	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage DS3000 series	A/P-C	iSCSI	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage DS3000 series	A/P-C	SAS	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage DS3500 series	A/P-C	Fibre Channel	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage DS3500 series	A/P-C	iSCSI	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage DS3500 series	A/P-C	SAS	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage DS5000 series	A/P-C	Fibre Channel	* IMPORTANT: These arrays require additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use any of these arrays with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP, including Auto Volume Transfer (AVT), also referred to as Auto Logical Drive Transfer (ADT). Specific firmware levels from the manufacturer for these arrays may also be required. * Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage DS5000 series with DS Storage Manager	A/P-C	Fibre Channel
System Storage DS8000 series	A/A	Fibre Channel	* Requires firmware version 6.1.600.46 or higher to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage DS8000 series with Subsystem Device Driver	A/A	Fibre Channel
System Storage N series	A/A-A	Fibre Channel	* Requires ONTAP version 7.0.2 or higher to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage N series	A/A-A	iSCSI	* Requires ONTAP version 7.0.2 or higher to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage N series	A/P-C	Fibre Channel	* Requires ONTAP version 7.0.2 or higher to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage N series	A/P-C	iSCSI	* Requires ONTAP version 7.0.2 or higher to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
System Storage XIV series	A/A	Fibre Channel	* To obtain Clustering support with IBM XIV, a minimum Firmware level of 10.0.1.c is required.

Imation

Array	Mode	Interface	Note
Nexsan E-Series Systems	A/A	Fibre Channel

Infinidat

Array	Mode	Interface	Note
InfiniBox F-Series	A/A	Fibre Channel

Intel

Array	Mode	Interface	Note
DC P3700	A/A	PCIe
SSD 910	A/A	PCIe

Kaminario

Array	Mode	Interface	Note
K2	A/A	Fibre Channel	* Support for this array model is available from InfoScale release 7.3.1 and later.

MacroSAN

Array	Mode	Interface	Note
MS series	A/A-A	Fibre Channel

Microsoft

Array	Mode	Interface	Note
Azure	A/A	Fibre Channel

NetApp

Array	Mode	Interface	Note
AFF Series	A/A-A	Fibre Channel	* A minimum version of ONTAP 8.3 is required to support this array.
AFF Series	A/A-A	iSCSI	* A minimum version of ONTAP 8.3 is required to support this array.
E_SERIES	A/A-A	Fibre Channel
FAS2000/FAS900/FAS200 series	A/A-A	Fibre Channel	* Supports Clustered Data ONTAP (cDOT) version 8.2.1 or greater with multiple Controller Nodes.
FAS2000/FAS900/FAS200 series	A/A-A	iSCSI	* Supports Clustered Data ONTAP (cDOT) version 8.2.1 or greater with multiple Controller Nodes.
FAS2000/FAS900/FAS200 series	A/P-C	Fibre Channel
FAS2000/FAS900/FAS200 series	A/P-C	iSCSI
FAS3000/V3000 series	A/A-A	Fibre Channel	* Supports Clustered Data ONTAP (cDOT) version 8.2.1 or greater with multiple Controller Nodes.
FAS3000/V3000 series	A/A-A	iSCSI	* Supports Clustered Data ONTAP (cDOT) version 8.2.1 or greater with multiple Controller Nodes.
FAS3000/V3000 series	A/P-C	Fibre Channel
FAS3000/V3000 series	A/P-C	iSCSI
FAS6000/V6000 series	A/A-A	Fibre Channel	* Supports Clustered Data ONTAP (cDOT) version 8.2.1 or greater with multiple Controller Nodes.
FAS6000/V6000 series	A/A-A	iSCSI	* Supports Clustered Data ONTAP (cDOT) version 8.2.1 or greater with multiple Controller Nodes.
FAS6000/V6000 series	A/P-C	Fibre Channel
FAS6000/V6000 series	A/P-C	iSCSI
FAS8000/FAS9000 Series	A/A-A	Fibre Channel	* Supports Clustered Data ONTAP (cDOT) version 8.2.1 or greater with multiple Controller Nodes.
FAS8000/FAS9000 Series	A/A-A	iSCSI	* Supports Clustered Data ONTAP (cDOT) version 8.2.1 or greater with multiple Controller Nodes.
FAS8000/FAS9000 Series	A/P-C	Fibre Channel
FAS8000/FAS9000 Series	A/P-C	iSCSI

Nexenta

Array	Mode	Interface	Note
NexentaStor	A/A-A	Fibre Channel	* Support for this array model is available from InfoScale release 7.3.1 and later.

Nexsan

Array	Mode	Interface	Note
Beast Systems	A/A	Fibre Channel

NimbleStorage

Array	Mode	Interface	Note
CS/AF/HF-Series	A/P-C	Fibre Channel	* Support for this array model is available from InfoScale release 7.3.1 and later.

Oracle

Array	Mode	Interface	Note
Axiom series	A/A-A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
FS1-2	A/A-A	Fibre Channel	* Support for this array model is available from InfoScale release 7.2 and later.
Storage 6580/6780 series	A/P-C	Fibre Channel
StorageTek 2500 series	A/P-C	Fibre Channel
StorageTek 2500 series	A/P-C	iSCSI
StorageTek 2500 series	A/P-C	SAS
StorageTek 6140 array	A/P-C	Fibre Channel
StorageTek 9900 series	A/A	Fibre Channel
StorageTek 9900 series with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
StorageTek 9985/9990 series	A/A	Fibre Channel
StorageTek 9985/9990 series with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
StorageTek 9985V system	A/A	Fibre Channel
StorageTek 9985V system with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
StorageTek 9990V system	A/A	Fibre Channel
StorageTek 9990V system with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel
Sun Storage 6180 array	A/P-C	Fibre Channel
ZFS Storage Appliance series	A/A-A	Fibre Channel	* Excludes ZFS Storage ZS4-4.
ZFS Storage Appliance series	A/A-A	iSCSI	* Excludes ZFS Storage ZS4-4.

Pure Storage

Array	Mode	Interface	Note
FlashArray series	A/A	Fibre Channel
FlashArray series	A/A-A	Fibre Channel

SanDisk

Array	Mode	Interface
ioDrive	A/A	PCIe
ioDrive2	A/A	PCIe
ioMemory PX600 series	A/A	PCIe
ioMemory SX300 series	A/A	PCIe

StorageTek

Array	Mode	Interface	Note
FlexLine 200/300 series	A/P-C	Fibre Channel	* Support for the StorageTek Flexline 300 series Storage Systems includes the FLX380 array only.

Sun

Array	Mode	Interface	Note
StorageTek 6130	A/P-C	Fibre Channel	* The Sun StorEdge 6130 array requires additional configuration steps in order to work properly with Veritas InfoScale Foundation for Windows. Before attempting to use the Sun StorEdge 6130 array with Veritas InfoScale Foundation for Windows DMP software, please contact the array hardware manufacturer for additional configuration instructions and updates. Several special settings must be enabled on these arrays to allow compatibility with DMP. Specific firmware levels from the manufacturer for these arrays may also be required.
StorageTek 6540	A/P-C	Fibre Channel
StorEdge 9910/9960	A/A	Fibre Channel	* Please check with Storage Array Manufacturer's Hardware Compatibility Support Matrices for required firmware to support Active/Active DSM mode in a cluster (VCS/MSCS/WSFC) with this array.
StorEdge 9910/9960 with HDLM (Hitachi Dynamic Link Manager)	A/A	Fibre Channel

Violin Memory

Array	Mode	Interface	Note
Violin 3000/6000 series	A/A	Fibre Channel
Violin 3000/6000 series	A/A-A	Fibre Channel	* A minimum array firmware version G5.5.1 is required to support ALUA mode.